Windows Repair is a toolkit that can perform Windows repairs.
this windows advanced repair tool is ideal when Windows features are damaged or error messages are displayed.

This article explains how to use Windows Repair.
It also gives you some information about the tools in this application.

  • Windows Repair Overview


it is available in a free version with most basic repair functions.
The pro version offers Windows backup tools (Windows registry backup, etc.) as well as more advanced repair tool.
You can download directly this windows advanced repair tool from this link: Download Windows Repair
The installation of this Windows advanced repair tool is classic with an assistant, nothing special to note.

  • Windows Repair menus


Once installed, a Windows Repair icon in the notification area with a red toolbox.
Right click on this icon to open various functions of the software, such as:

1- Open Windows Repair: opens the interface of Windows Repair which then allows         to launch different checks and repairs
2- Open Pro Features: Provides access to the features of the Pro version
3- Open Registry Backup: these are the tools for backing up the Windows registry
4- Backup Registry Now: launches a Windows registry backup – more information:           How to back up and restore the Windows registry
5- Clean Memory: Empty the Windows memory which can allow a gain in speed,               convenient when the Windows memory is full
6- Windows Quick Links: opens various functions of Windows, it is a shortcut to find       them more easily
7- Open Tweeking.com: opens the site of the Windows Repair Editor
8- Reboot to safe Mode: Restart Windows in Safe Mode
9- Open This Programs Folder: Opens the windows repair installation folder
10- Exit: Close Windows Repair, the icon will disappear from the notification area.

Windows Repair

  • The Windows Repair interface


Here is the interface of Windows Repair, initially, it may be a little confusing.
Two levels of tabs are available.
The first floor is used to navigate the various functions, the second floor corresponds to the sub-functions.
We then find:

1- Pre-Scan: This is different operations to ensure that the system files and the file           system is not damaged. The repair of Windows functions will be useless or can go       wrong, if they are damaged.
2- Backup Tools: The backup tools offered by Windows Repair
3- Repair Main: all repair functions of Windows Repair
4- Advanced Repair (Pro): repairs available only for the Pro version, such as                       repairing the Windows firewall, or viewing hidden files and systems
5- Advanced Tools: tools only for the pro version
6- Settings: Windows Repair Settings

Windows Repair PreScan

Clearly, to repair Windows with Windows Repair, you will use the function Pre-scan and Repair Main.

  • The Pre-Scan of Windows Repair


Windows Repair works in two stages, a pre-scan that allows you to perform general repairs and then repair Windows.
These checks are optional but if your system is damaged, it is strongly recommended to do so.

Pre-scan includes the following steps:

          1- A restart called “power reset”
          2- A checkdisk to make sure the file system has no errors
          3- Repairing Windows variables
          4- An SFC repair to check the integrity of Windows system files.

  • Restart “Power Reset”


If you use a computer that has become very slow, it is advisable to remove the battery for a few minutes to reset some components and volatile memory.
For that :

      1- Turn off your computer
      2- Unplug the power cord, if it is a laptop remove the battery (see instructions if               necessary).
      3- With the power cord disconnected or the battery removed, press the power                      button for a few seconds, as if you wanted to turn on the power. This will drain              all the electricity in the computer.
      4- Re-plug everything in or replace the laptop battery.

Windows Repair Power Reset

  • Checkdisk and SFC

The other two steps are to perform a checkdisk and System File Check (SFC) to ensure that no system damage is present.
Step 3 is checkdisk or chkdsk, a system check utility that checks the file system and no inconsistencies or errors are present.
A restart of Windows is necessary to carry out the analysis which can last 1h30.
If you are experiencing slowness and problems, we advise you to pair this checkdisk with a check of your hard disk.

windows Repair checkdisk

As for the SFC, it verifies the system files, if they are not damaged or corrupted.
If this is the case, SFC attempts to repair them, the scan does not require a restart of Windows.

Windows Repair system file check

Windows Repair 2018

  • Repair Windows with Windows Repair


Once the pre-scan checks are done, you can start Windows repairs from the Repair -Main menu.
In this menu, different options, you can then start the repair of your choice or we offer pre-selected repairs to perform according to scenarios.

Thus the repair menus proposed by Windows Repair:

     1- Open Repairs: open the list of available repairs, it’s up to you to check the ones            that interest you.
     2- Present All Repair: will perform all available repairs
     3- Present Common Repair: Fixing the most common problems
     4- Preset Malware CleanUp Repair: the most common repairs to be made after a                computer virus attack.
     5- Present Permission Only: Fixes related to permissions issues, more details on           6- page: “You do not have permissions or sufficient access” error
     7- Present Windows Update: repairs related to Windows Update issues or errors. 

windows Repair tutorial

In all cases, you arrive at a list of available repairs, depending on the menu chosen, some repairs will be checked or not.
To start the repair, you just have to click on the Start Repairs button at the bottom right.

Tips before starting a Windows Repair:

Close all open programs and save your work
If you are on a laptop, connect to the area.

Windows 10 Repair

The operation starts with a succession of steps … black windows can open or close.

Windows 8 repair

Windows 7 Repair

Once is complete, a restart of Windows is necessary.
then asks you to restart the computer through this popup, click Yes to restart Windows.

windows system repair

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

We are sorry that this post was not useful for you!

Let us improve this post!